Wheel spacers are used for various reasons; to provide clearance between the wheels and brakes/ suspension, to look purposeful, or to improve handling. The Mini is unusual for a performance FWD car in that the front track width and rear track width are near identical. This results in the front washing out when pushed hard, i.e. the front slides (under steer). By comparison a standard 1989 205 GTi 1.9 is 30 mm wider at the front than the back! To combat this on the Mini, increasing the track width on the front will improve the front grip during cornering. A pair of GTT 6mm wheel spacers on the front can make a huge improvement to ‘turn in’. These are not universal spacers but made specifically for the Mini. All GTT spacers are sold in pairs.
Fits:- all Gen 1 Models
Extended wheel bolts will be required when fitting spacers to your vehicle. It is the responsibility of the person fitting the spacers to ensure the correct and safe fitment. Please ensure the backface of the spacer is completely flush with the wheel hub when fitting, It is also critical that the correct amount of turns are obtained from the wheel bolt when tightening the wheel back onto the vehicle.
£34+vat (6mm pair)